Mazda 2012 CX-7 Spezifikationen PDF herunterladen (Seite 365)

Black plate (365,1)

6. Turn the socket and bulb assembly to

remove it. Carefully remove the bulb

from its socket in the reflector by

gently pulling it straight back out of the

socket.

7. Install the new bulb in the reverse order

of the removal procedure.

Side-turn signal lights

Due to the complexity and difficulty of

the procedure, the LED bulbs must be

replaced by an Authorized Mazda Dealer.

NOTE

LED bulb replacement is not possible because

it is built into the unit. Replace the unit.

Brake lights/Taillights, Rear turn signal

lights, Rear side-marker lights,

Taillights (Liftgate side), Reverse lights

1. Make sure the ignition is switched off,

and the headlight switch is off.

2. Remove the cover with a cloth-

wrapped flathead screwdriver to the

cover.

Brake lights/Taillights, Rear turn signal

lights, Rear side-marker lights

Taillights (Liftgate side), Reverse lights

3. Turn the socket and bulb assembly

counterclockwise and remove it.

4. Disconnect the bulb from the socket.

Maintenance and Care

Owner Maintenance

6-45

CX-5_8CA5-EA-11L_Edition3 Page365

Friday, June 22 2012 3:47 PM

Form No.8CA5-EA-11L

1 2 ... 360 361 362 363 364 365 366 367 368 369 370 ... 487 488

Kommentare zu diesen Handbüchern

Keine Kommentare