Mazda 0000-8F-N02B Bedienungshandbuch PDF herunterladen (Seite 21)

4280159 Rev. A 10/10

FUNCTION TEST

Car Find

1. Press and hold START button - Horn should beep six times and parking lights should flash six times.

Remote Engine Start Functions

1. REMOTE ENGINE START - Make sure the key is removed from the ignition switch and the engine hood is

closed. Press the START button twice within 3 seconds. The parking lights should flash one time, the horn

should beep once, then the vehicle should crank and start. Once started, the parking lights will turn on and

stay on signifying the vehicle is running.

2. UNLOCK DOORS - While the vehicle is running on the remote engine start, press the START button once to

unlock all doors. Doors will lock 30 seconds after unlocking doors with START button unless a door is opened.

If any door is opened, the doors will not relock. The factory transmitters will not function normally during remote

engine start operation.

3. BRAKE PEDAL SAFETY - Start the vehicle using the remote engine start. Enter the vehicle and press the

brake pedal. The vehicle should shut off.

4. KEY-IN-SENSE - Insert the ignition key into the ignition switch but keep in the OFF position. Activate the

remote engine start. The vehicle should flash the lights once as if it is going to start, but then the horn should

beep twice and the remote engine start does not attempt to start the vehicle since it senses the key in the

ignition.

5. HOOD SAFETY SWITCH - Open the engine hood and activate the remote engine start. The horn should beep

two additional times signifying that hood safety switch is activated and the vehicle will not start. (Reference

section 24 if adjustment is needed.)

NOTE: IF ANY OF THE ABOVE FUNCTIONS DO NOT PERFORM AS DIRECTED, SEE TROUBLESHOOT-

ING GUIDE (SECTION 22).

FUNCTIONAL TESTING IS NOW COMPLETE.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26

Keine Kommentare

Mazda 0000-8F-N02B Bedienungshandbuch Seite 21